The USBNinja cable architecture is distinct from the O.MG cable. Where O.MG uses WiFi + ESP32, the Ninja Cable uses Bluetooth LE + ATtiny85 with V-USB and adds a Hall effect sensor for magnetic ring triggering. The firmware is fully open-source and well-documented. Here's how to build a functional clone, from easiest to most authentic. This is a guide on how to build your own USBNinja cable.

I'll take you through a complete pentest workstation build — from bare metal to engagement-ready. This setup assumes you'll use it as your primary attack machine. This is a guide on how to set up a PC for hacking.

Here's the complete operational guide to acquiring a burner phone, from planning through disposal.